Product introduction
Stainless steel plate is an alloy steel with smooth surface, high weldability, corrosion resistance, polishability, heat resistance, corrosion resistance and other characteristics. It is widely used in various industries and is an important material in modern industry. Stainless steel is divided into austenitic stainless steel, ferritic stainless steel, martensitic stainless steel, and duplex stainless steel according to the structure state.
Austenitic Stainless Steel
stainless steel with an austenitic structure at room temperature. Steel contains Cr≈18%, Ni≈8%-25% and C≈0.1%. Steel has high toughness and plasticity, but low strength.
Martensitic Stainless Steel
A steel whose mechanical properties can be adjusted by heat treatment. It has different strength and toughness at different tempering temperatures.
Duplex Stainless Steel
Austenitic and ferrite each account for about half of the structure. When the C content is low, the Cr content is 18% to 28%, and the Ni content is 3% to 10%. Some steels also contain alloying elements such as Mo, Cu, Si, Nb, Ti, and N. This type of steel has the characteristics of austenitic and ferritic stainless steel.
Ferritic Stainless Steel
It contains 15% to 30% chromium and has a body-centered cubic crystal structure. This type of steel generally does not contain nickel, and sometimes contains a small amount of Mo, Ti, Nb and other elements. This type of steel has the characteristics of large thermal conductivity, small expansion coefficient, good oxidation resistance, and excellent stress corrosion resistance.
Austenitic Stainless Steel | 201, 301, 304, 305, 310, 314, 316, 321, 347, 370, etc |
Martensitic Stainless Steel | 410, 414, 416, 416, 420, 431, 440A, 440B, 440C, etc |
Duplex Stainless Steel | S31803, S32101, S32205, S32304, S32750, etc |
Ferritic Stainless Steel | 429, 430, 433, 434, 435, 436, 439, etc |
Surface | Characteristic | Processing Technology |
N0.1 | Original | Pickled after hot rolling |
2D | Blunt | Hot rolling + annealing shot peening pickling + cold rolling + annealing pickling |
2B | Blurred | Hot rolling + annealing shot peening pickling + cold rolling + annealing pickling + tempering rolling |
N0.3 | Matte | Polishing and tempering rolling with 100-120 mesh abrasive materials |
N0.4 | Matte | Polishing and tempering rolling with 150-180 mesh abrasive material |
NO.240 | Matte | Polishing and tempering rolling with 240 mesh abrasive materials |
NO.320 | Matte | Polishing and tempering rolling with 320 mesh abrasive materials |
NO.400 | Matte | Polishing and tempering rolling with 400 mesh abrasive materials |
HL | Brushed | Grind the surface of the steel belt with an appropriate grinding grain size to make it show a certain longitudinal texture |
BA | Bright | The surface is annealed and shows high reflectivity |
6K | Mirror | Rough grinding and polishing |
8K | Mirror | Fine grinding and polishing |
Product category
Hot Rolled Stainless Steel Coil/Sheet | |
Steel Grade | 301, 304, 304L, 316, 316L, 316Ti, 410S, 410, 405, 430 |
Standard | ASTM A240/A240M, ASIffi SA-240, SA-24OM, JIS G 4304, EN 10028-7, EN 10088-2 |
Thickness(mm) | 3. 0-14. 0 |
Width(mm) | 1000-2000 |
Length(mm) | Sheet:≤6000; Coil |
Status | Solid Solution and Pickling; Annealing and Pickling |
Cold Rolled Stainless Steel Coil/Sheet | |
Steel Grade |
301, 304, 304L, 316, 316L, 316Ti, 321, 410S, 409, 409L,410, 420, 410S, 430, etc. |
Standard | ASTM A240/A240M, ASME SA-240/SA-240M, JIS G 4305, EN10028-7, EN10088-2 |
Thickness(mm) | 0.1mm-3mm,3mm-16mm |
Width(mm) | 1000-1219 |
Length(mm) | 1000-2438 or Coil |
Status | Solid Solution and Pickling; Annealing and Pickling |
FAQ:
Q1. What are your company's main products ?
A1: Our main products are Cold Rolled Stainless Steel Sheet, Hot Rolled Stainless Steel Sheet, Stainless Steel Coil Strip, Stainless Steel Bar Rod, etc.
Q2. How do you control quality ?
A2: Mill Test Certification is supplied with shipment, Third Party Inspection is available. and we also get ISO,SGS.
Q3: What is the terms of packing?
A3: generally, we pack our goods in bundles or coils with rods or belts, we could also pack the goods as the customers requirement.
Q4:What is your delivery time?
A4: For stocks, we could transport the goods to loading port within 7 days after we received your deposit
For production period, it usually takes about 7-15 days after receiving the deposit.
Q5. What are the advantages of your company ?
A35: We have many professionals, technical personnel, more competitive prices and best after-sales service than other stainless steel companies.
Q6. How many coutries you already exported ?
A6: Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Turkey, Jordan etc.
Q7. Can you provide sample ?
A7: We can provide the samll samples in stock for free, as long as you contact us.
Customized samples will take about 5-7days.